Huaian Construction New Material
-- The anti-corrosion materials expert at your side
<All products in this shop are manufacturer's supply, can take samples for free!>
Thin plastic polyethylene anticorrosion adhesive tape, also known as: PE anticorrosion adhesive tape, PE tape, PE anticorrosive cold wind tape, commonly known as: polyethylene anticorrosive tape, compound polyethylene anticorrosive tape, thin polyethylene tape glue type, technical name: polyethylene adhesive tape. Is a kind of polyolefins adhesive tapes.
Polyethylene anticorrosive tape series products, our company has 20 years of production technology experience, is the early domestic polyethylene adhesive tape manufacturers. My company according to SY/T0414 technical standards to manufacture thin adhesive polyethylene adhesive tape is made of high and low density mixed polyethylene rolled rough film (sheet) as the substrate, high gas density butyl rubber as the adhesive layer, using domestic solvent-free co-extrusion hot composite process made. According to its function, it is divided into anti-corrosion tape (inner tape), protective tape (outer tape) and Joint tape. Compound polyethylene anticorrosive tape is mainly used in oil, natural gas, chemical industry, electric power, shipbuilding, urban construction and other industries in the steel pipe body, pipe fittings outer wall anti-corrosion protection. Thin rubber type polyethylene anticorrosive adhesive tape and matching primer form an excellent protection system with acid and alkali resistance, aging resistance and corrosion resistance, which prolonging the life of its objects and providing a reliable guarantee.
For use in medium, according to the diameter range and anticorrosive coating level and structural requirements, conform to SY/T 0414-2017 and HG/T 20679-2014 standards, can provide a variety of colors and various specifications, models of polyethylene tape and primers. |
01 Uniform thickness, large cohesion, no bubbles
02 No degumming, no layering
03 Voltage resistance, heat aging resistance, UV resistance
04 Resistance to stress damage, suitable elongation, large temperature range
Product Name Model |
T100(Inner Tape) |
T200 (Outer Tape) |
T300(Joint Tape) |
|
|
|
T-140 T-150 T-160 T-170 T-180 |
T-240 T-250 T-255 T-265 T-270 |
T-360 T-380 |
Tape thickness |
Total thickness |
mm |
0.40 0.50 0.60 0.70 0.80 |
0.40 0.50 0.55 0.65 0.70 |
0.60 0.80 |
|
Base film thickness |
mm |
0.22 0.30 .035 0.40 0.50 |
0.27 0.35 0.40 0.50 0.50 |
0.30 0.40 |
|
Glue film thickness |
mm |
0.18 0.20 0.25 0.30 0.30 |
0.13 0.15 0.15 0.15 0.20 |
0.30 0.40 |
Tensile strength of base film |
Mpa |
≥20 |
≥23 |
≥23 |
Elongation at break of base film |
% |
≥400 |
≥350 |
≥350 |
Peel strength |
Primed steel |
N/cm |
≥28 |
- |
≥28 |
|
Tape backing |
N/cm |
≥8 |
Electrical strength |
KV/MM |
≥40 |
Volume resistivity |
Ω*m |
>1.50*1012 |
Water vapor transmittance (24h) |
mg/cm2 |
≤0.15 |
≤0.15 |
≤0.15 |
Uv aging resistance (2400h) |
% |
≥80 |
Uv aging resistance (168h) |
% |
≥85 |
Water absorption |
% |
≤0.10 |
Applicable temperature |
ºC |
-34~+75 |
Product color: Anti-corrosion tape (inner tape) black; Protective tape (outer tape) and Joint tape black, white, blue, green, red, etc
Tape width: 50~300mm Tape length: 15~240m
Core size: 38mm, 76mm paper core or hard paper plastic core
Product packaging: carton Kg/m² ;can be customized!
1. Remove rust, welding slag, burr, oil and debris on the surface of the pipeline, and keep it clean and dry. Meet the requirements of GB/ T8923, manual rust removal should reach ST3 level, mechanical rust removal should reach SA2.5 level.
2.The matching primer is applied manually or mechanically to ensure uniformity and no leakage.
3.Brush the matching primer for 3 to 5 minutes, and test it by hand if it feels sticky or not. It should not dry out, and then wrap the tape.
4.When wrapping the tape, the distance between the tape and the component should be kept symmetrical to ensure uniform speed, and do not go fast or slow.
5.The tension between the adhesive tape and the contact surface of the component should be increased as much as possible, and the application is not solid due to too small tension.
6.In accordance with the anti-corrosion level requirements to ensure the symmetry of the lap, customer service due to uneven lap wrinkles.
7.Construction temperature: -5~+50ºC; No rain, snow, fog humidity > 85% of the cases and large wind sand environment open construction.
1. Prevent sun exposure, prevent rain, antifreeze, pay attention to heat preservation, stack height ≤5 layers, to prevent crushing deformation.
2. When it is frozen below -5 ° C in transportation or storage, it should be stored at about 20 ° C for 48 hours before it can be used.
3. Should be cool, temperature 5~30ºC, relative humidity < 75% storage in the warehouse and away from heat and open flame.
4. Shelf life is 12 months.
Company Profile
Huaian Construction New Material CO.,LTD is a supplier of structural reinforcement, leakage repair and Anticorrosion for industrial and industrial pipelines, and provides waterproof materials for swimming pools, floors and other buildings.Has 15 own patents and declares high-tech enterprises. And participates in many large foreign trade fairs every year.
It can provide real third-party inspection reports and maintain cooperation with many large engineering companies around the world.
FAQ
1. Manufactureror Trading Company
We are manufacturer, located in Jiangsu ,China
2. Trade Term
FOB, CIP, CIF, C&F, EXW, FCA
3. Minimum Order
The minimum order is 3000 rolls.
4. Payment Terms
T/T (Telegraphic Transfer) , L/C at sight, Western Union
5. Estimated Time of Delivery
Based on order quantity:
Less than 5 tons, around 7-10 days.
5 - 10 tons, around 10-12 days
10- 20 tons, around 12 --15 days
More than 20 tons, depend on the agreement between two parties.
6. Free sample
The sample will be free , but the freight charge will be paid by buyer.
7. Logistics shipment
We can delivery the product by sea, truck, train, air, express delivery.
8. After-sales service.
1). Quality response
2). Providing technical proposal and field application training